“AJAY SENSORS” Pressure Transducer, Type PT 209 A – g/abs. series is based on a high performance sensor developed specifically for industrial and process applications. Uses 316 stainless steel diaphragm and stainless steel body, which is compatible with most fluid and gaseous pressure media.
Each transducer incorporates a high performance silicon micro machined sensor mounted in a glass to metal seal which is electron beam welded to an isolation diaphragm so that only stainless steel is in contact with pressure media. These transducers have high output, accurate to within ±0.15% FSO BSL. It has very low hysteresis. Resists to-drop shock, impact and continuous vibration. Operates at temperature ranging from (-) 40°C to +125°C and compensated from 0°C to 80°C. In built surface mount electronic components provided amplified output.
Pressure transducers can be supplied with a Digital Indicator, which offers a variety of features as listed in 289 Series Data Sheet.
|
Pressure Range |
350 mbar, 700 mbar Gauge |
||
|
Output |
0 – 5 V (Nominal) |
Compensated Temp. Range |
0°C to + 80°C |
|
Non-Linearity |
± 0.10 %F.S |
Use Temperature Range |
(-) 40°C to + 125°C |
|
Hysteresis |
± 0.05 %F.S |
Temp. Effect |
± 0.20 %F.S/°C |
|
Resolution |
Continuous |
Safe Overload |
4 times for 350 mbar to 60 bar |
|
Zero Balance |
± 1.0 %F.S |
Safe Overload |
2 times for 70 bar to 350 bar |
|
Insulation Resistance |
≥ 500 MΩ @ 45 VDC |
Natural Resonant Frequency |
Over 210 KHz |
|
Excitation Voltage |
± 15.0 VDC |
Electrical Connection |
Connector / 3m Pig Tail Cable |
|
Pressure Media |
Stainless Steel 316 |
Pressure Connection |
M10 x 1 / M14 x 1.5 mm Male |
