“AJAY SENSORS” Pressure Transducer, Type PT 205 – Differential series is based on a high performance sensor developed specifically for industrial and process applications. Uses stainless steel diaphragm and stainless steel body, which is compatible with most fluid and gaseous pressure media.
The transducer incorporates a high performance silicon micro machined sensor mounted in a glass to metal seal which is electron beam welded to an isolation diaphragm so that only stainless steel is in contact with pressure media. These transducers have high output, accurate to within ±0.5% FSO BSL. It has very low hysteresis. Resists to-drop shock, impact and continuous vibration. Operates at temperature ranging from (-) 40 °C to + 125°C.
Transducers can be supplied with signal conditioners (in-built) for high-level outputs (0-5V / 10V) as specified in 215 data sheet. All transducers are individually calibrated and certified for its accuracies.
Differential Pressure transducers can be supplied with a Digital Indicator, which offers a variety of features as listed in 289 Series Data Sheet.
|
Pressure Range |
350 mbar, 700 mbar |
Static Pressure |
|
|
Rated Output |
50 mV Nominal |
Compensated Temp. Range |
(-) 20°C to + 80°C |
|
Non-Linearity |
± 0.40 %F.S |
Use Temperature Range |
(-) 40°C to + 125°C |
|
Hysteresis |
± 0.10 %F.S |
Safe Overload |
1.5 times for Full Scale Pressure |
|
Zero Balance |
± 3.0 mV |
Resolution |
Continuous |
|
Input Resistance |
8 KΩ Nominal |
Natural Resonant Frequency |
Over 210 KHz |
|
Output Resistance |
2.5 KΩ Nominal |
Pressure Media (Compatible) |
Stainless Steel |
|
Insulation Resistance |
≥ 500 MΩ @ 45 VDC |
Electrical Connection |
Connector / 3m Pig Tail Cable |
|
Excitation Voltage |
10.0 VDC |
Pressure Connection |
¼” BSP / M14 X 1.5 mm Male |
