“AJAY SENSORS” Pressure Transducer, Type 201 – g series employs Strain Gauge (Foil Type) bonded to an integrally machined diaphragm and connected in a four active arm wheat stone bridge circuit. These transducers are fully temperature compensated for zero and sensitivity drift for a wide range.
All transducers are stainless steel constructed, and withstands shock and vibration. Transducers are available in low and high level electrical voltage and current output. All transducers are individually calibrated and certified for its accuracies.
Pressure transducers can be supplied with a Digital Indicator, which offers a variety of features as listed in 289 Series Catalogue.
|
Pressure Range (Kg/Cm²) |
20, 30, 50, 100, 150, 200, 250, 300, 400, 500, 600, 800 |
||
|
Special Range (Kg/Cm²) |
1000, 1500, 2000 |
||
|
Rated Output |
2.0 mV/V ± 0.1 |
Compensated Temp. Range |
0°C to 80°C |
|
Non-Linearity |
± 0.25 %F.S |
Use Temperature Range |
(-) 20°C to 110°C |
|
Hysteresis |
± 0.20 %F.S |
Temp. Effect on Zero |
± 0.010 %F.S/°C |
|
Resolution |
Continuous |
Temp. Effect on Span |
± 0.010 %F.S/°C |
|
Zero Balance |
± 2.0 %F.S |
Safe Overload |
150 %F.S |
|
Input Resistance |
400 Ω ± 30 |
Natural Resonant Frequency |
Over 8 KHz |
|
Output Resistance |
350 Ω ± 5 |
Pressure Media (Compatible) |
Stainless Steel |
|
Insulation Resistance |
≥ 500 MΩ @ 45 VDC |
Electrical Connection |
Connector / 3m Pig Tail Cable |
|
Excitation Voltage |
10.0 VDC |
Pressure Connection |
¼” BSP / M14 X 1.5 mm Male |
